ELEVATE GEOGARD AND ELEVATE PONDGARD EPDM RUBBER LINERS

Elevate GeoGard & Elevate PondGard EPDM Rubber Liners are a cured single-ply membrane made from an EPDM polymer formulated to be fish and plant friendly.

Brand: Holcim Elevate
Origin: USA

 

Preparation of Substrates:
1. Substrates must be clean, dry, smooth and free of sharp edges, fines, loose or foreign materials, oil, grease, and other materials that may damage the geomembrane.
2. All roughened surfaces that can damage the geomembrane shall be repaired as specified to offer a smooth substrate.
3. All substrate voids greater than 6.3 mm (0.25") wide shall be properly filled with an acceptable fill material.
Method of Application:
Elevate GeoGard & Elevate PondGard EPDM Rubber Liners are to be installed in accordance with current Elevate Specialty Products specifications and details.
Storage:

• Store away from sources of punctures and physical damage.

• Store away from ignition sources as the liner will burn when exposed to open flame.

Precautions:

• Take care when moving, transporting, handling, etc. to avoid sources of punctures and physical damage.

• Isolate waste products, such as petroleum products, greases, oils (mineral and vegetable) and animal fats from the liner. Contact Firestone Specialty Products for specific recommendations.

• Refer to Safety Data Sheets (SDS) for safety information.

Elevate GeoGard & Elevate PondGard Rubber Liners are perfect for:

- Decorative ponds
- Fountains
- Koi ponds
- Natural looking ponds
- Reflection ponds
- Streams
- Water gardens
- Waterfalls